Pd(II)/Lewis Acid Catalyzed Intramolecular Oxidative C−H Amination to Construct Carbazoles with Dioxygen

Transition-metal-catalyzed oxidative C−H amination reactions are among the most attractive topics in organic synthesis to construct nitrogen-containing motifs. The challenge is that most of these reactions employed stoichiometric oxidants to achieve satisfied catalytic efficiencies. Herein, we report a Pd(II)/LA-catalyzed (LA: Lewis acid) oxidative C−H amination reaction of 2-acetaminobiphenyls to construct carbazoles by using dioxygen balloon as the sole oxidant source, and the presence of LA sharply improved the catalytic efficiency of Pd(OAc)₂. Remarkably, in certain cases, the deacetylation of the annulation product happened under standard conditions to afford free carbazoles as the final product. The H/D exchange studies confirmed the reversibility of C−H activation and also disclosed multiple C−H activation sites by using −NAc and −NTs as the directing groups. In addition, the palladacycle compound was identified through ¹H NMR characterizations and proved to be the intermediate prior to the carbazole formation.     

Stereoselective Synthesis of Enamides through Palladium-Catalyzed Oxidative Amidation of Conjugated Olefins with 2-Pyridones

A palladium-catalyzed oxidative amidation of conjugated olefin with 2-pyridone is described. A series of E-Enamides were synthesized in a highly stereocontrolled manner. The reaction also accommodates other cyclic and acyclic amides. Z-Enamides were predominantly prepared for primary amides probably due to the presence of an intramolecular hydrogen bond. Gram-scale synthesis of enamide and the following oxidative annulation with diphenylacetylene demonstrates the synthetic utility of this reaction.     

Tuning the Composition and Structure of Ni@MoC Nanosheets for Highly Active and Stable Electrocatalysis in Water Splitting

The conventional electrolytic water-splitting process for hydrogen production is plagued by high energy consumption, low efficiency, and the requirement of expensive catalysts. Therefore, finding effective, affordable, and stable catalysts to drive this reaction is urgently needed. We report a nanosheet catalyst composed of carbon nanotubes encapsulated with MoC/Mo₂C, the Ni@MoC-700 nanosheet showcases low overpotentials of 275 mV for the oxygen evolution reaction and 173 mV for the hydrogen evolution reaction at a current density of 10 mA ⋅ cm⁻². Particularly noteworthy is its outstanding performance in a two-electrode system, where a cell potential of merely 1.64 V is sufficient to achieve the desired current density of 10 mA ⋅ cm⁻². Furthermore, the catalyst demonstrates exceptional durability, maintaining its activity over a continuous operation of 40 hours with only minimal attenuation in overpotential. These outstanding activity levels and long-term stability unequivocally highlight the promising potential of the Ni@MoC-700 catalyst for large-scale water-splitting applications.     

Synthesis of PEGylated hyaluronic acid for loading dichloro(1,2-diaminocyclohexane)platinum(Ⅱ)(DACHPt) in nanoparticles for cancer treatment

Dichloro(1,2-diaminocyclohexane)platinum(II)(DACHPt), a cisplatin(CDDP) analog, has shown lower toxicity than CDDP and no cross-resistance with CDDP in many CDDP-resistant cancers. PEGylated hyaluronan(m PEG-HA) is an m PEG conjugated with hyaluronan biodegradable polymer which is a naturally occurring biopolymer in the interstitium, is primarily cleared by the lymphatic system. m PEGhyaluronan–DACHPt(PEG-HA–Pt) conjugate could circulate long-term in the bloodstream and increase DACHPt concentration in the tumor site and decrease systemic toxicity. m PEG-HA conjugates with the range of 1%–5% substitution were synthesized, and the structures were confirmed by1 H NMR and IR. The particle size of DACHPt incorporated with m PEG-HA was about 86 nm and the loading content and efficiency were about 19%(w/w) and 86%, respectively. The synthesized m PEG-HA with different PEG substitution degrees presented non toxicity, and the cell viability of DACHPt loaded in m PEG-HA nanoparticles increased with increasing doses of DACHPt. DACHPt release from nanoparticles slightly decreased with increasing PEG substitution degree from 1% to 5% at 37 8C, pH 7.4 PBS solution. The DACHPt loaded in m PEG-HA nanoparticles significantly inhibited the growth of A549 xenografts in nude mice when compared to the DACHPt loaded in HA nanoparticles and the control group after 4 weeks treatment(p 0.01 compared with control). The body weight change curve shows that the mice weight loss was less than 5% by treating with both DACHPt loaded in m PEG-HA and HA nanoparticles. In conclusion, a novel DACHPt loaded m PEG-HA delivery system was developed with sustained release and increased platinum concentration in the tumor.     

Solvent free synthesis of trifluoromethyl tertiary alcohols by cross Aldol reaction

Exceedingly fast preparation of trifluoromethyl tertiary alcohols has been accomplished from methyl ketones and trifluoromethyl ketones under solvent free conditions by cross Aldol reaction. The reaction was achieved in the presence of common inorganic base by grinding method at ambient temperature to give β-trifluoromethyl-β-hydroxyl ketones in high yields (up to 95%).     

在线中空纤维膜液相微萃取/高效液相色谱法测定3种痕量芳香胺

建立了一种在线中空纤维膜液相微萃取/高效液相色谱联用技术测定3种痕量芳香胺(邻甲苯胺、3,3'-二甲基联苯胺、2-萘胺)的新方法,以顺序注射仪将中空纤维膜液相微萃取装置和高效液相色谱仪连接搭建在线检测装置,利用此装置优化了萃取溶剂、供体相、接收相、盐效应、搅拌速度、萃取时间等前处理条件。结果表明,以正辛醇为萃取溶剂,0.1 mol·L-1Na OH与300 mg·L-1的Na Cl溶液为供体相,0.1 mol·L-1HCl溶液为接收相,搅拌速度为400 r·min-1,萃取40 min后,3种芳香胺的富集倍数可达48~96倍。该方法对3种痕量芳香胺的线性范围为0.01~0.25 mg·L-1,相关系数(r)不小于0.998 4,检出限为0.3~2.2μg·L-1,相对标准偏差(RSD,n=10)为3.1%~4.0%,用于印染废水中3种芳香胺的分析,回收率为98.0%~102.0%。该方法操作简单,有机溶剂用量少,富集率较高,可用于痕量芳香胺类物质的快速分析。     

喹啉黄中各组分的定性及定量研究

利用高效液相色谱(HPLC)对喹啉黄各组分进行分离并定量,通过液相色谱–串联质谱(LC–MS/MS)对各组分进行定性。以0.01 mol/L乙酸铵溶液和甲醇为流动相进行梯度洗脱,利用Agilent XDB–C18色谱柱对喹啉黄各组分进行分离,峰面积归一化法定量。质谱采用电喷雾负离子(ESI–)模式电离,多反应监测(MRM)模式检测,对喹啉黄各组分进行定性。结果表明,喹啉黄主要成分为喹啉黄一钠盐和喹啉黄二钠盐,分别各有两种同分异构体,各组分质量浓度在5.0~100.0μg/m L范围内与峰面积呈良好的线性关系。加标回收率为98.2%~99.1%,测定结果的相对标准偏差为0.90%~1.58%(n=6)。该方法具有良好的精密度和准确度,可用于喹啉黄中各组分的测定。     

Simultaneous determination of naphazoline and pyridoxine in eye drops using excitation–emission matrix fluorescence coupled with second-order calibration method based on alternating trilinear decomposition algorithm

A novel method is developed for the direct determination of naphazoline hydrochloride(NAP) and pyridoxine hydrochloride(VB6) in commercial eye drops. By using excitation–emission matrix(EEM)fluorescence coupled with second-order calibration method based on the alternating trilinear decomposition(ATLD) algorithm, the proposed approach can achieve quantitative analysis successfully even in the presence of unknown and uncalibrated interferences. The method shows good linearity for NAP and VB6 with correlation coefficients greater than 0.99. The results were in good agreement with the labeled contents. To further confirm the feasibility and reliability of the proposed method, the same batch samples were analyzed by multiple reaction monitoring(MRM) based on LC–MS/MS method.T-test demonstrated that there are no significant differences between the prediction results of the two methods. The satisfactory results obtained in this work indicate that the use of the second-order calibration method coupled with the EEM is a promising tool for industrial quality control and pharmaceutical analysis due to its advantages of high sensitivity, low-cost and simple implementation.     

Fabrication and performance of microencapsulated phase change materials with hybrid shell by in situ polymerization in Pickering emulsion

Microencapsulated phase change materials (MePCMs) using melamine–formaldehyde resin/SiO₂ as shell were investigated in this paper. Organically modified SiO₂ particles were employed to stabilize Pickering emulsion, and in situ polymerization of melamine and formaldehyde was carried out to form hybrid shell. The performances of resultant MePCMs with hybrid shell were investigated comparatively with the MePCMs with polymer shell. SiO₂ particles raise the microencapsulation efficiency by improving the stability of emulsion and providing a precipitation site for melamine–formaldehyde resin. Also, the mechanical strength, thermal reliability, and anti‐osmosis performance of MePCMs were improved significantly by SiO₂ particles in the shell. Our study shows that Pickering emulsion is a simple and robust template for MePCMs with polymer‐inorganic hybrid shell. Copyright © 2015 John Wiley & Sons, Ltd.     

Effects of GC temperature and carrier gas flow rate on on‐line oxygen isotope measurement as studied by on‐column CO injection

Although deemed important to δ¹⁸O measurement by on‐line high‐temperature conversion techniques, how the GC conditions affect δ¹⁸O measurement is rarely examined adequately. We therefore directly injected different volumes of CO or CO–N₂ mix onto the GC column by a six‐port valve and examined the CO yield, CO peak shape, CO–N₂ separation, and δ¹⁸O value under different GC temperatures and carrier gas flow rates. The results show the CO peak area decreases when the carrier gas flow rate increases. The GC temperature has no effect on peak area. The peak width increases with the increase of CO injection volume but decreases with the increase of GC temperature and carrier gas flow rate. The peak intensity increases with the increase of GC temperature and CO injection volume but decreases with the increase of carrier gas flow rate. The peak separation time between N₂ and CO decreases with an increase of GC temperature and carrier gas flow rate. δ¹⁸O value decreases with the increase of CO injection volume (when half m/z 28 intensity is <3 V) and GC temperature but is insensitive to carrier gas flow rate. On average, the δ¹⁸O value of the injected CO is about 1‰ higher than that of identical reference CO. The δ¹⁸O distribution pattern of the injected CO is probably a combined result of ion source nonlinearity and preferential loss of C¹⁶O or oxygen isotopic exchange between zeolite and CO. For practical application, a lower carrier gas flow rate is therefore recommended as it has the combined advantages of higher CO yield, better N₂–CO separation, lower He consumption, and insignificant effect on δ¹⁸O value, while a higher‐than‐60 °C GC temperature and a larger‐than‐100 µl CO volume is also recommended. When no N₂ peak is expected, a higher GC temperature is recommended, and vice versa. Copyright © 2015 John Wiley & Sons, Ltd.